Cub-12R
15 watts RMS/ 12" Celestion driver/ 3 x ECC83 pre amp tube/ 2x EL84 output tubes/ FX loop/REVERB
The new Cub-12R features great, straight ahead vintage valve tone with a splash of high quality reverb. The Cub-12R houses a Celestion 12” driver and pushes out up to 15 watts RMS of pure vintage valve tone, up to 15 watts RMS with the option of running at significantly less output. The preamp consists of the following controls from right to left: gain, treble, middle, bass, volume, tone and reverb.
The Cub-12R's valve complement consists of 3 x ECC83 valves in the preamp, giving you the ability to dial in plenty of gain. The output section consists of 2 x EL84 output valves, which give you that classic British tonality to the amp when they are pushed hard.
The Cub-12R features an output trick - if you look at the front panel you'll notice two input sockets, one labeled 15W, the other labeled <1W. If you plug into the 15W socket you get the full power of the amp - 15 Watts of wonderfully warm valve tone. Plug into the <1W and you get .75 of a Watt output., which allows you to drive the amplifier as hard as you like, giving you masses of power amp compression and a pleasing break up for that elusive Dark Art tone.
The Cub-12R's rear panel features everything you'll need - additional speaker outs with 8 & 16 Ohm options, a footswitch socket for switching the reverb and an effects loop.
The Cub-12Roffers a welcome addition to the Laney tube amp range giving everyone the opportunity to experience the sound and feel of a good quality tube amp.
Cub-12R Specifications:
Power RMS: 15 W RMS & < 1W RMS
Inputs: 2 : 15W & <1W
Equalization: Bass, Middle, Treble
Preamp Valves: 3 x ECC83
Output Valves: 2 x EL84
Class: Class A/B
Reverb: Yes
Footswitch: FS1 (Not Included)
FX Loop(s): Yes
Impedance: 8 Ohm
Drivers: 12 inch Celestion Driver
Weight: 11.5 kg (approx. 25.5 lbs)
Dimensions: Width 435mm x Height 427mm x Depth 235mm (approx. 17” x 17” x 9.5”)
Channel Controls: Gain, Treble, Middle, Bass, Volume & Tone
